Input signal to the Darlington comes from the feed current 741. Since R6 is connected to earth, positive or negative current signal is also going through R4 or R5. The voltage drop across this resistance serves as the input signal to the transistor pairs. A common dc negative feedback from the collector junction with T2 and T4 stabilize the DC circuit and the junction point is maintained at zero volts. So, there is no coupling capacitor needed for the speaker.
PARTS LIST : | |
R1 | 10k |
R2 | 4.7KΩ |
R3 | 270KΩ |
R4 | 1k |
R5 | 1k |
R6 | 47Ω 1W |
C1 | 50 Pf |
C2 | 0.01 mF |
T1 | BC178 |
T2 | 2N6107 |
T3 | AC108 |
T4 | 2N5294 |
IC | LM741 |
LS1 | 50W 4Ω |
Class-D Power Audio Amplifier Using MD7120 MOSFET Driver This is the circuit design of Class-D…
This is the circuit diagram of active antenna amplifier for FM radio device. With only…
This is the schematic design of 400 Watt 70 Volt amplifier capable to deliver about…
This is the circuit diagram of 150W power amplifier which built using power transistors. The…
This is the circuit design of 1000W stereo audio amplifier. It is a very good…
This is the circuit design of 150W car audio amplifier. The circuit is divided in…