400 Watt 70 Volt Amplifier Part List

Transistors

• 2SC5200 or equivalent MJL21194 : 8
• 2SD718 or equivalent C5198 : 1
• 2SB688 or equivalent A1941 : 1
• 2SC2229 or 2SC2230 : 2
• A1015 or A872 : 2
• TIP42 : 1

Capacitors

• 6800uF/80V or 10000uF/80V Electrolytic Capacitor : 2
• 100uF/80V Electrolytic Capacitor : 2
• 2.2uF/50V Electrolytic Capacitor : 1
• 10pF ceramic capacitor : 2
• 470pF (471) ceramic capacitor : 2

Resistors

• 0.33 ohm 5W : 8
• 4.7 ohm 1W : 8
• 100 ohm 1W resistors (brown, black, brown) : 2
• 33 ohm 1/4W (orange, orange, black) : 1
• 150 ohm resistors at 1/4W (brown, green, brown) : 3
• 10K ohm 1/4W Resistor (Brown, Black, Orange) : 1
• 1K ohm 1/4W Resistor (Brown, Black, Purple) : 1
• 4.7K ohm 1W (yellow, violet, purple) : 1
• 68K ohm 1/4W (blue, green, orange) : 2
• 33K ohm to 1/4W (orange, orange, orange) : 1
• 3.3K ohm 1/4W resistors (orange, white, purple) : 2

Diodes

• Diode bridge of 15 amps or greater : 1
• Diodes 1N4007 : 3
• Zener Diode of 18 volts or 24 volts : 1

Others

• Fuse holder and fuse of 3 amperes.
• Transformer for the amplifier should be 55 + 55 volts AC with a current of at least 10 amps.

400 Watt 70 Volt Amplifier PCB Layout Design

This is the PCB layout for 400w pawer audio amplifier. The power supply is already included in the printed circuit board although in the schematic design, the power supply was not included. Please refer to the connection image in the end of this post.

400 Watt 70 Volt Amplifier Top PCB Design and Component Layout

400W Power Amplifier Connection

The post 400 Watt 70 Volt Amplifier appeared first on Amplifier Circuit Design.