Circuit IC1 provides a do amplification of 40 dB, which drops to about 20 dB when the frequency rises above 500 Hz. To minimize the (resistor) noise and the load of the op amp at higher frequencies, the value of R3 is a compromise. The associated polystyrene capacitor, C2, should have a tolerance of 1 to 2%.
To raise the 2-mV output of the dynamic pick-up to line level at 1 kHz, linear amplifier IC2 has been added. This stage has a gain of 22 dB, so a signal of 250 mV is available at its output.
Description for Preamplifier for magnetic phono cartridges schematics
|1||Title:||Preamplifier for magnetic phono cartridges schematics|
|2||Upload by:||Amplifier Circuit|
|3||Upload date:||February 14, 2012|