Above schematic diagram is 1 Watt stereo audio amplifier based IC KA2209 can be used for small electronic device such as radio, smartphone, tablets or other gadgets which require little sound amplification 😀
This is the text book circuit for this IC in stereo mode. It is ideal for battery powered operation. Power output depends critically on speaker resistance & supply voltage. At 3V into 4 ohm speakers the power is 0.1W. At 6V into 4 ohm speakers it is 0.65W. At 9V it is over 1W.
This stereo amplifier module uses the Samsung KA2209 8-pin IC. This IC can be replaced with TDA2822. It is designed for portable casette players & radios. It has a wide operating supply voltage of 1.8V to 9V so it is suitable for battery operation.
Components List:
R3, R4 : 4R7 yellow violet gold
R1, R2 : 10K brown black orange
C1 : 10uF mini
C4, C5 : 100uF/25V electrolytic capacitor
C2, C3 : 470uF/16V electrolytic capacitor
C6, C7 : 100nF box capacitor
IC KA2209
8 pin IC socket
Download the circuit manual:
Class-D Power Audio Amplifier Using MD7120 MOSFET Driver This is the circuit design of Class-D…
This is the circuit diagram of active antenna amplifier for FM radio device. With only…
This is the schematic design of 400 Watt 70 Volt amplifier capable to deliver about…
This is the circuit diagram of 150W power amplifier which built using power transistors. The…
This is the circuit design of 1000W stereo audio amplifier. It is a very good…
This is the circuit design of 150W car audio amplifier. The circuit is divided in…